Rans Engineering & Chemicals Private Limited

• RANSANTICO-AL is easy to apply-no heating or thinning is required.
• Highly reflective, up to 70% of sunrays, thus increasing the life of bitumen roofs.
• Reduces surface temperature by as much as 8-10??c, thus reducing cooling and heating costs.
• Less maintenance cost of roofs etc.
• Capable of withstanding thermal and structural movement in roofs and walls.
• High Coverage, one kg covers 8-10sqmt.
• Easy to apply like other paints.

• RANSANTICO-AL is used to protect and beautify smooth asphalt roofs from U.V rays.
• Used to protect metal structure as it is an anti-rust and corrosion coating.
• Used on asphalt roofs, metal roofs, metal walls, masonry wallsetc. To reflect sunrays in order to reduce air-conditioning costs in summer.

RANSBOND-STICK is a cold applied adhesive for fixing roofing felts and other insulating material on various surfaces. RANSBOND-STICK is recommended where the use of hot bitumen is either difficult or prohibited. RANSBOND-STICK is manufactured from select grades of bitumen, suitably blended with other raw materials, to achieve creamy appearance in semi liquid consistency.

Properties: 
RANSBOND-STICK is cold applied adhesive with following properties:-

• Easy to use.
• Cold Adhesion.
• Well bonding with Asphalt, and more materials.
• Applied as Bitumen Grades for pasting purpose.

• Apply RANSBOND-STICKon the cleaned surface @ 1.4 kg per sqm with a spatula or brush.
• Allow approximately 10 minutes before laying felt and sticking the same with mildpressure.
• Overlaps should be suitably sealed

Properties: 
RANSMASTIC-FLOOR is hot applied mastic with following properties:-

• Easy to use.
• Hot Adhesion.
• Well bonding with Concrete, or other Surfaces.

• LPG Godowns, CNG Godowns where sparkling is measure issue occurred while loading and unloading of Cylinders.

• RANSMASTIC-FLOOR can be supplied in 25 kg blocks, which can be broken in convenient size and remelted and mixed in the mastic cooker at the site of work.
• Store Material in a clean dry area protected from direct sunlight and extreme heat and cold. Unopened Rolls can be stored for 6 months. Use oldest material first.

RANSANTICO-BLP is a general purpose bituminous anticorrosive compound suitable for coating inside the water tanks, drums and other such applications. It does not have any harmful reaction with drinking water. It is lead free and resistant to acid, alkali etc. It is very effective against corrosion. The product coating protects the surface against moisture means acting as waterproofing agent. It is having good adhesive properties to the surface. RANSANTICO-BLP is manufactured under strict quality control. 

Properties

Unpigmented Bituminous Based Paint with Special Grade of Bitumen and Solvents.

Excellent Adhesion, Multipurpose & Fast Curing.

Areas Of Use

RANSANTICO-BLP is used for general purposes, especially for protection of water tanks, chimneys, boilers, equipment, machines etc. The use of material is extended also to appliances connected with ammunition. It does not have any harmful reaction on drinking water.

Anti-Corrosive Paint is also used for protection against corrosion. It is used as paint forecast iron pipes, conduit pipes etc.

Paint is manufactured as per IS 158/1981 is recommended to be used for the protection of funnels boilers, apparatus and appliances connected with ammunition.

Paint manufactured as per IS 9862/1981 is black, lead free and acid, alkali water and chlorine resisting wand is suitable for painting of drinking water tanks, apparatus, equipments machines.

Storage: 
Store containers in a clean dry area protected from direct sunlight and extreme heat and cold. Unopened containers can be stored for 12 months.

Additional Information:

• Item Code: RECPL-404

A low viscosity bituminous solution. It is highly penetrative and has good adhesion to most surfaces. Bituminous Primer for cold application complies to IS: 3384-1986 and BS 4147-1980.

Properties

• Excellent Adhesion
• Fast Curing
• Chemical Resistant
• Multipurpose

RANSBITU-PMRis used before waterproofing membrane on the following structures:

• Inverted Roofs & parapets
• Terraces, balconies & patios
• Sunken slabs
• Bridges & tunnels
• Airport aprons & ramp areas

RANSBITU-PMRin tropical regions can also beused for waterproofing of below ground concrete structures like:

• Concrete foundations & footings
• Basements
• Pile heads
• Swimming pools & water retaining structures

An outstanding quality of RANSKOTE emulsion is the drying from inside so that the evaporation of moisture is outward:

• Continuous, jointless surface over entire insulation.
• Impervious to moisture and perfectly weatherproof.
• Highly resistant to acidic and alkaline corrosive influences.
• Non-inflammable, inert, odorless and taintless.
• Will not flow or creep at any surface temperatures normally encountered.
• Will not flake or crack under winter frost.
• Insulation maintained permanently dry with a high degree of efficiency thus ensuring that fuel and operating costs are kept at a minimum.

Areas Of Use: 
RANSKOTE-PMR is used before waterproofing membrane on the following structures:

• Inverted Roofs & parapets
• Terraces, balconies & patios
• Sunken slabs
• Bridges & tunnels
• Airport aprons & ramp areas.

The Membrane is a polymeric waterproofing membrane consisting of five layers. The Centre core consists of 20 micron High Molecular High Density Polyethylene Film.  The Polyethylene Film is the reinforcement barrier against water and moisture. The Centre Core is provided on both sides with APP polymer modified bitumen with properties of high Softening point, Heat resistance and high Penetration making it ideal for waterproofing purposes.

• Ideal for use in situation where certain degree of expansion, contraction and vibration is expected, like around J Hooks used for fixing Asbestos / GI sheets.
• Cold applied and ready to use. Does not require specialized handling for application.
• Does not creep or flow when applied on vertical or sloping surfaces.
• Remains plastic for a considerable time and, therefore, can accommodate a good degree of expansion, contraction and vibration.

• In case of GI / Asbestos roof sheets, apply RANSPLAST-CC into the overlapping joints with knife and spatula after cleaning rusted joints and applying a coat of RANSBITU-PMR.
• To fix J Hooks for Asbestos or other roofing sheets, top of the holding boltsshould be covered with RANSPLAST-CC and a limpet washer fixed as cover.
• Locate the cracks and then widen them to a V section, about 25 mm deep.
• Brush out the loose particles from the crack and dust it clean.
• Paint the cracks lightly with RANSBITU-PMR. Press RANSPLAST-CC into the painted crack by hand or with a trowel and finish overlapping the crack by at least 25 mm on either side.

• Easy to use.
• Best adhesion to use.
• Well bonding with Thermocole, and more materials.
• Applied as fixing/pasting material.

• Apply RANSBOND-FLEXby brush on both surfaces and leave to ‘break’ for 15 to 20 minutes.When the applied film turns dark brown to black, both the surfaces which are to be stuck togethershould be pressed firmly.
• Apply firm and even pressure over the whole area which is to be stuck and expel any trapped air. The adhesive will hold the sheet in place immediately, but no attempt should be made to pull thesheets. No additional work is to be done on the completed area for at least 24 hours as theadhesive required this length of time to obtain the strength of bond.

• RANSBOND-FLEX is packaged in 20Kgs. Also available in customized packaging.
• Store Material in a clean dry area protected from direct sunlight and extreme heat and cold. Unopened Rolls can be stored for 6 months. Use oldest material first.